
A chiller is a machine that helps you remove heat from liquids to make them cooler. You use a chiller when you need precise cooling for buildings, factories, or equipment. The chiller works by moving heat away from the liquid and sending it into the air or water, following the refrigeration cycle. In 2025, the global market for chillers grows steadily. You can see the estimated market sizes below:
Year | Market Size (USD Billion) |
|---|---|
2024 | 4.28 – 11.6 |
2025 | Slightly above 4.28 / 11.6 |
2032-2033 | 5.50 / 16.77 |
Chiller Basics
Definition
A chiller is a machine that takes heat out of a liquid. People use it to keep things cool in buildings or factories. It works by using the refrigeration cycle. This cycle moves heat from the liquid and sends it outside. You can find chillers in big air-conditioning systems. These systems make cold water and send it to coils. The coils help cool the air inside buildings. There are different types of chillers. Some are air-cooled, some are water-cooled, and some are evaporative-cooled. Each type gets rid of heat in its own way. But all chillers do the same main job. They remove heat from a liquid and help keep things at the right temperature.
Tip: Think of a chiller like a huge refrigerator for buildings or machines. It uses special parts such as compressors, condensers, evaporators, and expansion valves. These parts help move heat away from places you do not want it.
Purpose
You use a chiller to keep temperatures safe and steady. In factories, a chiller cools machines that get hot while working. This helps machines work well and not break down. In big buildings, a chiller keeps the air cool for everyone inside. You also see chillers in hospitals and data centers. In these places, keeping things cool is very important.
Chillers do more than just make things cold. They help save energy and protect expensive equipment. By keeping machines and rooms at the right temperature, a chiller can lower repair costs. It also helps things last longer. You can use chillers for many jobs, such as:
Cooling plastic molding machines during production
Keeping the temperature steady in pharmaceutical labs
Giving air conditioning in offices and malls
Protecting medical equipment and computer servers from getting too hot
A chiller gives you exact control over cooling. It helps stop problems like overheating, which can cause damage or stop work. You can trust a chiller to keep your work safe and running smoothly.
How Does a Chiller Work
Cooling Cycle
You may ask, how does a chiller keep things cool? The answer is the refrigeration cycle. This cycle uses several main parts to move heat away from liquids. It sends the heat outside. Here are the steps for the cooling process:
The evaporator starts by taking heat from the liquid. The refrigerant soaks up this heat. It changes from a liquid into a vapor.
The compressor grabs the vapor and squeezes it hard. This makes the refrigerant hotter and raises its pressure.
The condenser gets the hot, high-pressure vapor next. It cools the vapor down and turns it back into a liquid. The heat leaves the refrigerant and goes into the air or water.
The expansion valve controls how much refrigerant goes back to the evaporator. It lowers the pressure and temperature before the refrigerant enters again.
The controls help the chiller run safely and smoothly. They watch for problems and make changes if needed.
The refrigeration cycle is like a loop. The refrigerant keeps moving through these steps. It takes heat from the liquid and sends it outside. This lets the chiller keep things cool all the time.
Here is a table that shows the main parts and what they do in the cooling cycle:
Component | Role in Cooling Cycle |
|---|---|
Evaporator | Takes heat from the liquid and turns refrigerant into vapor. |
Compressor | Makes the vapor refrigerant hotter and increases its pressure. |
Condenser | Lets heat out to the air or water and turns vapor back to liquid. |
Expansion Valve | Drops the pressure and temperature before refrigerant goes to the evaporator again. |
Controls | Watches and adjusts the chiller to keep it safe and working well. |
Heat Transfer
A chiller moves heat from a liquid to the outside. The refrigeration cycle makes this happen. The evaporator takes heat from the fluid and cools it down. The refrigerant inside the evaporator turns from liquid to vapor as it takes in heat.
Then, the compressor pushes the vapor to higher pressure and temperature. The hot vapor goes to the condenser. In the condenser, the refrigerant gives its heat to the air or water outside. The refrigerant turns back into a liquid. The expansion valve lowers the pressure and temperature of the refrigerant. This gets it ready to go back into the evaporator.
Chillers use different ways to get rid of heat. Air-cooled systems use fans to blow air over coils. Water-cooled systems use cooling towers and water to take away heat. Some chillers near the ocean use seawater to carry heat away. Each way helps the chiller send heat from the liquid to the outside.
Note: Refrigerants have very low boiling points. They soak up heat fast and let it go easily. This makes chillers very good at keeping things cool.
You can count on the chiller to do this over and over. The controls help keep the system safe and working well. When you know how the refrigeration cycle works, you see why chillers are so important for cooling in many places.
Chiller Components

Compressor
The compressor is like the heart of a chiller. It takes in refrigerant gas after it gets heat from your building. The compressor squeezes the gas. This makes the gas hotter and raises its pressure. This step is very important. It helps the refrigerant release heat later. Without the compressor, the refrigerant cannot push heat outside. Big chillers use centrifugal compressors. These move a lot of refrigerant fast and well. Small chillers use scroll, screw, or reciprocating compressors. Each type works best for different jobs.
Compressor Type | Best For | Efficiency Features |
|---|---|---|
Centrifugal | Large chillers | High flow, good efficiency |
Scroll, Screw, Reciprocating | Small/medium chillers | Good lift, reliable at lower loads |
ARI certification lets you trust how efficient these compressors are.
Condenser
The condenser helps the chiller get rid of heat. It gets hot, high-pressure refrigerant vapor from the compressor. The condenser moves this heat to water or air. This depends on the chiller type. As the refrigerant cools, it turns from a gas to a liquid. The cooled refrigerant goes to the next stage. The heated water or air takes the heat away. This keeps your building or equipment cool and helps the chiller work well.
Evaporator
The evaporator is where cooling happens. The refrigerant comes in as a cold liquid. It takes heat from water or another fluid you want to chill. As the refrigerant gets heat, it boils and turns into vapor. This change pulls heat out of the water. The water gets colder. The cold water then moves through your building or process to give cooling.
Expansion Valve
The expansion valve is like a gatekeeper for refrigerant. It controls how much refrigerant goes into the evaporator. The valve senses temperature and pressure at the evaporator outlet. It opens or closes to keep things balanced. This careful control protects the compressor and keeps the chiller safe.
The valve senses heat at the evaporator outlet.
It opens to let in more refrigerant if needed.
It closes a bit if there is too much refrigerant.
This cycle repeats to keep cooling steady.
Controls
Modern chillers use smart controls to watch every part. These controls check temperatures, pressures, and flow rates. They change settings to keep the chiller safe and working well. With advanced controls, you can find problems early. This helps your cooling system run its best.
Good controls help you save energy and stop costly breakdowns.
Types of Chillers
Air-Cooled
Air-cooled chillers are used where water is hard to get or costs a lot. These chillers use air to take heat away from the refrigerant. Fans blow air over copper tubes and aluminum fins in the condenser. This helps the system push heat out into the air. You do not need cooling towers, water pumps, or extra pipes. This makes air-cooled chillers easy to set up and take care of.
Air-cooled chillers work best outside or in places with good airflow. People use them to cool plastic machines, food, and medical tools.
Some important things about air-cooled chillers are:
They use different compressors, like hermetic or semi-hermetic, based on size.
The condenser has copper tubes and aluminum fins to move heat.
Fans blow air over the condenser to cool the refrigerant.
Expansion valves control how much refrigerant moves for cooling.
Filter driers keep the system clean by taking out water and dirt.
You can put these chillers where you cannot use much water.
Newer air-cooled chillers have variable speed drives for compressors and fans. This helps save energy and makes them work better. Air-cooled chillers can be loud and bigger than other types. But they are simple and cost less for small systems.
Water-Cooled
Water-cooled chillers use water to cool things down. You see these chillers in big buildings, factories, and hospitals. They need cooling towers, pumps, and water treatment to work right. The water takes heat from the refrigerant and moves it out through the cooling tower.
Aspect | Water-Cooled Chillers | Air-Cooled Chillers |
|---|---|---|
Energy Efficiency | More energy-efficient because water is cooler | Less efficient, uses warmer air |
Installation | Needs cooling towers, pumps, water treatment; more complex | Easier to install, no water or cooling tower needed |
Space Requirements | Needs more space for extra equipment | Needs less space |
Water Usage | Needs water all the time, which can be a problem | Does not use water |
Maintenance | Harder to take care of because of extra equipment | May need more care because it is outside |
Initial Cost | Costs more to set up because of extra parts | Costs less to set up |
Operating Cost | Costs less to run because it saves energy | Costs more to run because it is less efficient |
Water-cooled chillers save more energy because water moves heat better than air. These chillers are quiet and last longer since they are inside, away from weather. You need more room for all the extra parts, and you must clean and treat the water often. Water-cooled chillers cost more to put in, but you save money on energy later. Do not use them where water is hard to get or there are strict water rules.
Water-cooled chillers are great for big cooling jobs and quiet places.
Absorption
Absorption chillers use heat, not electricity, to cool things. You can use steam, hot water, or waste heat from other machines as power. These chillers do not have mechanical compressors. They use a mix of water and lithium bromide. Heat makes the water vapor leave the mix, and the vapor cools in the condenser. The evaporator then takes heat from the chilled water, making things cool.
You might pick absorption chillers if you have extra heat or want to use less electricity. They work well in power plants or factories with waste heat. Absorption chillers are not as efficient as mechanical ones, but they help use energy that would be wasted.
Other Types
In 2025, you can find new chillers with special features. Some use magnetic bearings to run quieter and save more energy. Others have smart controls so you can change settings from far away. Eco-friendly refrigerants like R-32 and R-1234yf help protect the environment. Variable speed compressors change cooling power to save energy. Vapor absorption chillers use heat instead of electricity, so they are good where waste heat is easy to get.
Smart chillers with IoT let you check how they work and how much energy they use from your phone or computer.
These new ideas give you more ways to cool things, especially if you want to save energy or follow new rules.
Chiller Applications and 2025 Trends

Industrial Uses
In 2025, many industries use chillers. Factories use chillers to keep machines cool. Food companies need chillers to store food safely. Labs use chillers to control temperature exactly. Other big users are chemicals, plastics, rubber, and medical fields. These groups want to save energy and money. They also want to follow new green rules. In North America and Asia-Pacific, more factories and cities need chillers.
Manufacturing
Food processing
Pharmaceuticals
Chemicals & Petrochemicals
Food & Beverages
Plastics
Rubber
Medical
Chillers help keep machines safe and products good. You can count on chillers for steady cooling in busy places.
Building Cooling
Chillers cool big buildings like offices and malls. They make cold water for HVAC systems. This water moves in pipes and takes heat from the air. Air-cooled chillers use fans to move air over the condenser. Water-cooled chillers use towers and water to take away heat. Air-cooled chillers are easy to put in and cost less. Water-cooled chillers work better for large buildings and save more energy.
Chillers cool water for HVAC systems.
Chilled water takes heat from the air.
Air-cooled chillers use fans; easy to install.
Water-cooled chillers use towers; more efficient.
Chillers help control humidity and clean the air.
Good care keeps chillers working well.
Chiller systems give you cooling for all building sizes and needs.
Refrigeration Advances
In 2025, new chillers save energy and help the planet. Companies like G&D Chillers make small chillers with green refrigerants. LG HVAC uses low-GWP refrigerants and smart controls for better work. Oil-free magnetic bearing chillers need less care and work better. Smart sensors and IoT let you check and change chillers from anywhere. These new ideas help you use less energy and meet climate goals.
Green refrigerants
Magnetic bearing compressors
Smart controls and IoT checks
Training for better care
You get chillers that use less energy and last longer.
Efficiency and Regulations
You must follow new chiller rules in 2025. The EPA stops high-GWP refrigerants like R410A. Now you use low-GWP types like R-454B and R-32. These changes help cut greenhouse gases. Makers build chillers to meet tough efficiency rules. You see new compressors, variable speed drives, and water-saving ways. These can lower energy use by up to 30%. You must pick, run, and care for chillers the right way.
Aspect | Details |
|---|---|
Refrigerants being phased out | High-GWP HFCs like R410A (GWP ~1890) |
New refrigerants adopted | Low-GWP alternatives such as R-454B and R-32 |
Regulatory drivers | EPA regulations and state-level mandates in US and Canada |
Implementation timeline | US: Jan 1, 2024 (some states); Canada: Jan 1, 2025; US nationwide: Jan 1, 2026 |
Environmental benefit | Lower global warming potential, compliance with refrigerant phasedown |
Tip: Always check the newest rules before you buy or put in a chiller.
You get the best results by picking the right size, caring for chillers, and using smart controls.
You use a chiller to keep things cool and safe. There are different types, like air-cooled and water-cooled chillers. Each type has special parts and jobs. In 2025, chillers have new technology and tougher rules for the environment.
The market keeps growing, especially for small chillers.
Compressors and controls get smarter and work better.
Places like North America and Europe want more green ideas.
You deal with new rules and supply problems, so you need to learn more.
When you pick a chiller, look at how well it works, its new features, and the rules to make the best choice.